newagegaskets@gmail.com
011-26234901 / 26419578
Home » PRODUCT LINE

Gaskets and Sheets Product Line- New Age Gaskets Delhi


                                                                                                                       EIL approved Gasket Suppliers North India

We take pleasure in introducing ourselves as AUTHORISED DEALERS for KLINGER / CHAMPION & FRENZELIT-GERMANY for ‘READY CUT GASKETS & SHEETS’, details of which are as follows :
 
SL. MARKING SERVICE / PIPE LINES
A.1 GASKETS & SHEETS marked KLINGER – 80 / SPITMAAN – 20 For WATER, LOW PRESSURE STEAM PIPE LINES
A.2 GASKETS & SHEETS marked KLINGER-OILIT/SPITMAAN-59 OIL For OILS / CHEMICALS / PETRO-CHEMICALS / FUELS / GAS PIPE  LINES
A.3 METALLIC GASKETS & SHEETS marked KLINGERIT-1000 (METALLIC) / SPITMAAN-54 SUPER  (METALLIC) For MEDIUM PRESSURE STEAM / COMPRESSED AIR PIPE LINES

We also keep stocks of following materials :

SOFT EXPANDED PTFE GASKETS

SPIRAL WOUND GASKETS WITH  GRAPHITE WINDING

– GASKETS IN GRAPHITE (METALLIC / NON-METALLIC)

NBR / NEOPRENE RUBBER GASKETS

KLINGERIT-UNIVERSAL (BLUE) (for THERMIC FLUIDS)

ASBESTOS FREE GASKETS marked SPITMAAN-AF-120 / NOVA-280

SOLID & PTFE ENVELOPE GASKETS

NON-ASBESTOS GLAND PACKING

We believe that use of READY CUT GASKETS results into more that 30% SAVINGS in ‘ACTUAL COSTS’ due to minimum wastage.

We can offer suggestions regarding selection of the Gasketing, if required

Should you require any additional samples, literature, please contact on Email : newagegaskets@gmail.com

LATEST BLOGS

Installing A Gasket - Keep These In Mind

Installing a gasket after you've chosen the right one, should be considered as a one time task and should be done with complete care. Dealing with gasket failure proves to be much costlier than the cost of the gasket.A leaking joint means wasted
Installing A Gasket - Keep These In Mind
Are Graphite Gaskets and Seals The Best Choice For Your Requirement?

Are Graphite Gaskets and Seals The Best Choice For Your Requirement?

Are Graphite Gaskets The Best Choice For Your Requirement? High temperatures challenge many gasket materials. To talk of a few, nitrile gaskets will go up to about 95 degreeC, silicone gaskets to 200 degreeC and PTFE to 260 degreeC,. Then

Repair or Replacement of a Blown Head Gasket. What's Worth?

The head gasket is a piece of thin material with a lot of holes in it. Gaskets are made out of flexible materials like rubber, cork, fiberglass, plastic polymers, or felt. Gaskets have broad applications in about every area of life but are often
Repair or Replacement of a Blown Head Gasket. What's Worth?
Why Does A Head Gasket Blow

Why Does A Head Gasket Blow

                                    Why Does A Head Gasket Blow The head gasket forms a seal among the engine block and the cylinder head.  This

Main Styles of Gaskets

Today’s gasket styles can be differentiated through the sort of pressure generated to cause them to seal. The most effective gaskets are known as “overwhelm” gaskets. These flat gaskets depend upon brute pressure to tightly squeeze
Main Styles of Gaskets

VIEW ALL BLOGS